These six point star brass tiles carry a close mesh of six-point stars joined by hexagons, small in scale so it reads as an all-over texture.
Details
- Size: each star mesh tile, 7.9 x 7.9 in (20 x 20 cm) or 11.8 x 11.8 in (30 x 30 cm) per tile
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 6 mm with a raised rim; hollow back with a small hanger
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos.
Options
Choose a Size and set; coverage for the star mesh tiles assumes tiles butted together:
- 20 cm, 8 tiles: 3.4 sq ft (0.32 m²); 4 x 2 = 31.5 x 15.5 in (80 x 40 cm)
- 20 cm, 12 tiles: 5.2 sq ft (0.48 m²); 4 x 3 = 31.5 x 23.5 in (80 x 60 cm)
- 20 cm, 16 tiles: 6.9 sq ft (0.64 m²); 4 x 4 = 31.5 x 31.5 in (80 x 80 cm)
- 20 cm, 20 tiles: 8.6 sq ft (0.80 m²); 5 x 4 = 39.5 x 31.5 in (100 x 80 cm)
- 30 cm, 4 tiles: 3.9 sq ft (0.36 m²); 2 x 2 = 23.5 x 23.5 in (60 x 60 cm)
- 30 cm, 6 tiles: 5.8 sq ft (0.54 m²); 3 x 2 = 35.4 x 23.5 in (90 x 60 cm)
- 30 cm, 9 tiles: 8.7 sq ft (0.81 m²); 3 x 3 = 35.4 x 35.4 in (90 x 90 cm)
Tiles cannot be cut, so plan the layout in whole tiles. Three 30 cm tiles span 35.4 in (90 cm).
Use, fitting and care
They suit a vanity wall, a range or sink wall, the face of a kitchen island, or the lining of a recessed niche. To install, butter the hollow back of each star mesh tile with tile adhesive, press it onto a flat, clean wall and finish with grout or caulk; a lone tile can hang from its hanger. Behind a hob, allow its maker's clearance. Wipe with a soft, damp cloth; harsh cleaners strip the patina.
Made by hand
The fine mesh is raised by hand from solid brass sheet over a ground punched by hand, then finished in an aged bronze patina sealed with wax.
Browse more: Brass wall tiles · Marrakesh lattice tiles · Hexagram lattice backsplash tiles