For Celtic knot backsplash tiles with a geometric feel, this set mixes four square designs: the Framed Cross, Framed Lattice, Lattice Loop and Open Square Weave knots, with straight weaves that give a range or sink wall an orderly look.
Details
- Size: each tile 3.9 x 3.9 in (10 x 10 cm), covering 0.11 sq ft (0.01 m²)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 6 mm, with a raised rim; the hollow back has a small hanger
- Handmade: embossed to order, so relief and patina vary slightly from the photos
Options
Choose a Set of the square weave tiles, the 4 designs in equal numbers; coverage assumes tiles butted together:
- 32 tiles: 3.4 sq ft (0.32 m²), 8 x 4 = 31.5 x 15.5 in (80 x 40 cm); 8 of each design
- 48 tiles: 5.2 sq ft (0.48 m²), 8 x 6 = 31.5 x 23.5 in (80 x 60 cm); 12 of each design
- 60 tiles: 6.5 sq ft (0.60 m²), 10 x 6 = 39.4 x 23.5 in (100 x 60 cm); 15 of each design
Tiles cannot be cut, so plan in whole tiles; ten in a row run 39.4 in (100 cm).
Use, fitting and care
Run the set behind a range or sink, back a coffee station or bar, face a kitchen island or breakfast bar, add a border row to plain tile, or dress an entryway wall. Fit the square weave tiles as ceramic tile, with adhesive in the hollow backs, on a flat, clean wall, finished with grout or caulk. Behind a cooktop, leave the clearance its maker asks for. A soft, damp cloth and a dry one keep the square weave tiles clean; scourers wear the patina.
Made by hand
The four weaves are raised by hand over a hand-punched ground, their straight bands crisp against the texture.
Browse more: Open Square Weave Knot tiles · Framed Lattice Knot tiles · The full brass tile range