For Celtic kitchen accent tiles that sit quietly among plain ones, the Lattice Loop Knot crosses loops on the diagonal and closes them with rounded ends. Dropped one by one into a plain backsplash or grouped into a small panel, they add pattern without crowding the wall.
Details
- Size: each tile 3.9 x 3.9 in (10 x 10 cm), covering 0.11 sq ft (0.01 m²)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 6 mm, with a raised rim; the hollow back has a small hanger
- Handmade: embossed to order, so relief and patina vary slightly from the photos
Options
Choose a Set of the lattice loop tiles, all in this one design; coverage assumes tiles butted together:
- 30 tiles: 3.2 sq ft (0.30 m²), 6 x 5 = 23.5 x 19.5 in (60 x 50 cm)
- 45 tiles: 4.8 sq ft (0.45 m²), 9 x 5 = 35.5 x 19.5 in (90 x 50 cm)
- 60 tiles: 6.5 sq ft (0.60 m²), 10 x 6 = 39.4 x 23.5 in (100 x 60 cm)
Tiles cannot be cut, so plan in whole tiles; ten in a row run 39.4 in (100 cm).
Use, fitting and care
Dot them through a plain kitchen backsplash, run a band behind a range or sink, back a coffee station or bar, face a kitchen island or breakfast bar, or frame a fireplace surround or hearth. Set the lattice loop tiles like wall tile: adhesive in each hollow back, pressed onto a flat, clean wall, then grout or caulk. Behind a cooktop, leave the clearance its maker asks for. A soft, damp cloth and a dry one keep the lattice loop tiles clean; scourers wear the patina.
Made by hand
The diagonal loops and their rounded ends are raised by hand over a hand-punched ground.
Browse more: Mixed square weave set · X Braid Knot tiles · The full brass tile range