These Celtic square weave tiles carry the Open Square Weave Knot, broad bands crossing over and under in a simple grid. The wide bands and open spaces give it a plain, architectural look.
Details
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Size: each tile is 10 x 10 cm (3.9 x 3.9 in)
- Depth: 6 mm, with a raised rim around each tile; the back is hollow and has a small hanger
- Comes as: sets of 30, 45 or 60 tiles, all in this one design
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos
Sizes and coverage
Choose a quantity from the Set menu. Each tile covers 0.01 m² (0.11 sq ft), with tiles butted together.
- 30 tiles: 0.30 m² (3.2 sq ft), e.g. 6 x 5 tiles = 60 x 50 cm
- 45 tiles: 0.45 m² (4.8 sq ft), e.g. 9 x 5 tiles = 90 x 50 cm
- 60 tiles: 0.60 m² (6.5 sq ft), e.g. 10 x 6 tiles = 100 x 60 cm
The tiles cannot be cut, so plan the layout around whole tiles. A row of ten tiles runs 100 cm (39.4 in).
Where to use it
- A band behind a range or along the sink wall
- Lining a niche in a bathroom, kitchen or living room
- A border row inside a larger field of plain tile
- Facing a kitchen island or the front of a breakfast bar
- Accent tiles dotted through a plain kitchen backsplash
Installing and care
Fill the hollow backs with tile adhesive and set the tiles on a flat, clean wall as you would ceramic tile, finishing with grout or caulk. Any tile can instead hang alone from its back hanger. Behind a cooktop, leave the clearance your cooktop maker asks for. Tiles cannot be cut, so work out the layout in whole tiles first. Clean with a soft, damp cloth and dry it off; scouring pads and harsh cleaners will wear through the patina.
See the full range of brass wall tiles, or compare this design with Celtic Knot Backsplash Tiles and Celtic Square Knot Tiles.
