Turned on the diagonal, the Diamond Weave Knot on these Celtic weave knot tiles is a square of bands passing over and under one another. The result is a crisp diamond of interlace, plain enough to repeat across a whole wall without feeling busy.
Details
- Size: each tile 3.9 x 3.9 in (10 x 10 cm), covering 0.11 sq ft (0.01 m²)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 6 mm, with a raised rim; the hollow back has a small hanger
- Handmade: embossed to order, so relief and patina vary slightly from the photos
Options
Choose a Set of the diamond weave tiles, all in this one design; coverage assumes tiles butted together:
- 30 tiles: 3.2 sq ft (0.30 m²), 6 x 5 = 23.5 x 19.5 in (60 x 50 cm)
- 45 tiles: 4.8 sq ft (0.45 m²), 9 x 5 = 35.5 x 19.5 in (90 x 50 cm)
- 60 tiles: 6.5 sq ft (0.60 m²), 10 x 6 = 39.4 x 23.5 in (100 x 60 cm)
Tiles cannot be cut, so plan in whole tiles; ten in a row run 39.4 in (100 cm).
Where to use them, fitting and care
The weave shows well as a grid above a desk, sofa or console, a band behind a range or sink, accents in a plain kitchen backsplash, the lining of a niche, or a border row inside plain tile. For the diamond weave tiles, butter each hollow back with tile adhesive, press onto a flat, clean wall, then grout or caulk. Behind a cooktop, leave the clearance its maker asks for. Clean the diamond weave tiles with a soft damp cloth, then dry; abrasives strip the patina.
How they are made
Each band of the diamond is embossed by hand, the crossings pressed so the weave reads clearly, over a hand-punched ground.
Browse more: Diamond Lattice Knot tiles · Mixed square weave set · The full brass tile range