A tightly woven lattice of interlaced squares covers each of these Celtic diamond knot tiles from edge to edge; the design is called the Diamond Lattice Knot. Because the pattern fills the whole face, a set reads almost like a woven textile in metal.
Details
- Size: each tile 3.9 x 3.9 in (10 x 10 cm), covering 0.11 sq ft (0.01 m²)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 6 mm, with a raised rim; the hollow back has a small hanger
- Handmade: embossed to order, so relief and patina vary slightly from the photos
Options
Choose a Set of the diamond lattice tiles, all in this one design; coverage assumes tiles butted together:
- 30 tiles: 3.2 sq ft (0.30 m²), 6 x 5 = 23.5 x 19.5 in (60 x 50 cm)
- 45 tiles: 4.8 sq ft (0.45 m²), 9 x 5 = 35.5 x 19.5 in (90 x 50 cm)
- 60 tiles: 6.5 sq ft (0.60 m²), 10 x 6 = 39.4 x 23.5 in (100 x 60 cm)
Tiles cannot be cut, so plan in whole tiles; ten in a row run 39.4 in (100 cm).
Use, fitting and care
Try a band behind a range or sink, a lined niche in a bathroom, kitchen or living room, accents through a plain backsplash, the face of a kitchen island or breakfast bar, or a border row in plain tile. For the diamond lattice tiles, butter each hollow back with tile adhesive, press onto a flat, clean wall, then grout or caulk. Behind a cooktop, leave the clearance its maker asks for. A soft, damp cloth and a dry one keep the diamond lattice tiles clean; scourers wear the patina.
Made by hand
Every square of the lattice is embossed by hand, which is why the surface has the gentle irregularity of handwork rather than a stamped finish.
Browse more: Diamond Weave Knot tiles · Framed Lattice Knot tiles · The full brass tile range