This tree of life brass wall panel has a heavy, deeply grooved trunk rising into a dense canopy of broad leaves, the boughs stretching out to the edges.
Details
- Size: the broadleaf tree panel runs 19.7 x 19.7 in to 39.4 x 39.4 in (50 x 50 cm to 100 x 100 cm)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 10 mm with a raised rim; wooden backing board with a small hanger
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos.
Options
Each Size is one single broadleaf tree panel:
- 50 x 50 cm: 19.7 in square, 2.7 sq ft (0.25 m²)
- 60 x 60 cm: 23.6 in square, 3.9 sq ft (0.36 m²)
- 70 x 70 cm: 27.6 in square, 5.3 sq ft (0.49 m²)
- 80 x 80 cm: 31.5 in square, 6.9 sq ft (0.64 m²)
- 90 x 90 cm: 35.4 in square, 8.7 sq ft (0.81 m²)
- 100 x 100 cm: 39.4 in square, 10.8 sq ft (1.00 m²)
Panels cannot be cut, so measure for the whole piece.
Placement and care
It works as the focal point of an entry, hall or stairwell, over a bed or in place of a headboard, as a statement panel on the wall behind a kitchen range, or over a sofa, sideboard or console. Hang the broadleaf tree panel from the small hanger on its wooden board, or fix the board to a clean, flat wall with construction adhesive, supporting it while the glue sets. Near a hob, leave its maker's clearance. A soft, damp cloth keeps the patina intact.
How it is made
Every leaf in the canopy is raised by hand from solid brass sheet over a ground punched by hand, and the finished panel takes an aged bronze patina sealed with wax.
Browse more: Brass wall tiles · Broad leaf tree of life wall art · Spreading oak relief panel