This brass relief wall panel is filled edge to edge by a broad, oak-like tree, its thick trunk standing on wide roots beneath countless fine branches and a thick canopy of little leaves. With no circle or border to contain it, the tree reads as one large piece of relief across the wall.
Details
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Size: from 50 x 50 cm (19.7 x 19.7 in) up to 100 x 100 cm (39.4 x 39.4 in)
- Depth: 10 mm, with a raised rim, backed with a wooden board that carries a small hanger
- Comes as: one single panel
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos
Sizes and coverage
Every size is one single panel; choose it from the Size menu.
- 50 x 50 cm (19.7 x 19.7 in): 0.25 m² (2.7 sq ft)
- 60 x 60 cm (23.6 x 23.6 in): 0.36 m² (3.9 sq ft)
- 70 x 70 cm (27.6 x 27.6 in): 0.49 m² (5.3 sq ft)
- 80 x 80 cm (31.5 x 31.5 in): 0.64 m² (6.9 sq ft)
- 90 x 90 cm (35.4 x 35.4 in): 0.81 m² (8.7 sq ft)
- 100 x 100 cm (39.4 x 39.4 in): 1.00 m² (10.8 sq ft)
A panel cannot be cut, so measure the wall for the full piece.
Where to use it
- Over a sofa, sideboard or console
- Above a fireplace mantel, or leaned on the mantel shelf
- A statement panel on the wall behind a kitchen range
- A hotel lobby, restaurant or office reception wall
Installing and care
The wooden board on the back carries a small hanger, so the panel can simply hang as wall art. To fix it permanently, fix the board to a clean, flat wall using construction adhesive and support it until it cures. Behind a cooktop, leave the clearance your cooktop maker asks for. The panel cannot be cut, so size the space to the full piece. To clean, use a soft, damp cloth, then dry; abrasives and strong cleaners strip the patina.
Browse the other brass wall tiles, including Oak Tree Brass Wall Art and Brass Stove Backsplash Panel.
