This brass stove backsplash panel shows a broad old oak spreading its low crown across the full width, with acorns among its leaves and long roots trailing along the bottom edge. It was drawn wide from the outset, to fill a range wall or the long wall above a mantel.
Details
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Size: from 60 x 40 cm (23.6 x 15.7 in) up to 90 x 60 cm (35.4 x 23.6 in)
- Depth: 10 mm, with a raised rim, backed with a wooden board that carries a small hanger
- Comes as: one single panel
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos
Sizes and coverage
Every size is one single panel; choose it from the Size menu.
- 60 x 40 cm (23.6 x 15.7 in): 0.24 m² (2.6 sq ft)
- 75 x 50 cm (29.5 x 19.7 in): 0.38 m² (4.0 sq ft)
- 90 x 60 cm (35.4 x 23.6 in): 0.54 m² (5.8 sq ft)
A panel cannot be cut, so measure the wall for the full piece.
Where to use it
- A statement panel on the wall behind a kitchen range
- Above a fireplace mantel, or leaned on the mantel shelf
- A dining room feature wall
- Over a sofa, sideboard or console
Installing and care
Hang the panel from the small hanger on its wooden board, or stand it on a mantel or shelf. As a backsplash, fix the board to a clean, flat wall using construction adhesive, propping the panel while the glue sets. Behind a cooktop, leave the clearance your cooktop maker asks for. The panel cannot be cut, so size the space to the full piece. Clean with a soft, damp cloth and dry it off; scouring pads and harsh cleaners will wear through the patina.
This design sits in our brass wall tiles collection; Brass Relief Wall Panel and Oak Leaf and Acorn Fireplace Tiles would work alongside it.
