This tree of life brass wall hanging shows a full, rounded canopy spreading evenly from one smooth trunk, the branches dividing again and again into small leaves above a spread of roots. Its symmetry makes it a calm centrepiece above a sofa or sideboard.
Details
- Size: the leafy tree panel runs 19.7 x 19.7 in to 39.4 x 39.4 in (50 x 50 cm to 100 x 100 cm)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 10 mm with a raised rim; wooden backing board with a small hanger
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos.
Options
Each Size is one single leafy tree panel:
- 50 x 50 cm: 19.7 in square, 2.7 sq ft (0.25 m²)
- 60 x 60 cm: 23.6 in square, 3.9 sq ft (0.36 m²)
- 70 x 70 cm: 27.6 in square, 5.3 sq ft (0.49 m²)
- 80 x 80 cm: 31.5 in square, 6.9 sq ft (0.64 m²)
- 90 x 90 cm: 35.4 in square, 8.7 sq ft (0.81 m²)
- 100 x 100 cm: 39.4 in square, 10.8 sq ft (1.00 m²)
Panels cannot be cut, so measure for the whole piece.
Hanging, fitting and care
Hang it over a sofa or sideboard, above a mantel, on a dining room wall, or give it as a housewarming gift. A small hanger on the backing board lets the leafy tree panel hang like a picture; for a backsplash, fix that board to a clean, flat wall with construction adhesive, propped until cured. Behind a hob, allow its maker's clearance. Wipe with a soft, damp cloth; harsh cleaners strip the patina.
Hand-embossed brass
The branches and their many small leaves are raised by hand from flat solid brass over a hand-punched ground, then finished in an aged bronze patina sealed with wax.
Browse more: Brass wall tiles · Round crown tree of life wall art · Leafy crown tree in a circle