As a brass tree of life gift, this panel has a quiet line: a tall, slim tree set within a raised ring, its fine branches forking again and again and ending in small paired leaves. The roots gather neatly at the foot of the ring, with plain punched corners outside the circle.
Details
- Size: the slender tree panel runs 19.7 x 19.7 in to 39.4 x 39.4 in (50 x 50 cm to 100 x 100 cm)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 10 mm with a raised rim; wooden backing board with a small hanger
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos.
Options
Each Size is one single slender tree panel:
- 50 x 50 cm: 19.7 in square, 2.7 sq ft (0.25 m²)
- 60 x 60 cm: 23.6 in square, 3.9 sq ft (0.36 m²)
- 70 x 70 cm: 27.6 in square, 5.3 sq ft (0.49 m²)
- 80 x 80 cm: 31.5 in square, 6.9 sq ft (0.64 m²)
- 90 x 90 cm: 35.4 in square, 8.7 sq ft (0.81 m²)
- 100 x 100 cm: 39.4 in square, 10.8 sq ft (1.00 m²)
Panels cannot be cut, so measure for the whole piece.
Placement and care
As a housewarming gift it hangs easily above a mantel, over a sideboard, or in an entry or stairwell. Hang the slender tree panel from the small hanger on its wooden board, or fix the board to a clean, flat wall with construction adhesive, supporting it while the glue sets. Near a hob, leave its maker's clearance. A soft, damp cloth keeps the patina intact.
Hand-embossed brass
The ring and every fine branch are raised by hand from flat solid brass over a hand-punched ground, then finished in an aged bronze patina sealed with wax.
Browse more: Brass wall tiles · Open branch tree in a circle · Curling branch tree of life in a circle