On this spiral tree of life brass panel, each branch curls into a spiral as it rises from the trunk, and every spiral is tipped with leaves.
Details
- Size: the spiral tree panel runs 19.7 x 19.7 in to 39.4 x 39.4 in (50 x 50 cm to 100 x 100 cm)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 10 mm with a raised rim; wooden backing board with a small hanger
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos.
Options
Each Size is one single spiral tree panel:
- 50 x 50 cm: 19.7 in square, 2.7 sq ft (0.25 m²)
- 60 x 60 cm: 23.6 in square, 3.9 sq ft (0.36 m²)
- 70 x 70 cm: 27.6 in square, 5.3 sq ft (0.49 m²)
- 80 x 80 cm: 31.5 in square, 6.9 sq ft (0.64 m²)
- 90 x 90 cm: 35.4 in square, 8.7 sq ft (0.81 m²)
- 100 x 100 cm: 39.4 in square, 10.8 sq ft (1.00 m²)
Panels cannot be cut, so measure for the whole piece.
Hanging, fitting and care
It looks good over a bed or in place of a headboard, over a sofa, sideboard or console, or above a fireplace mantel; it can lean on the mantel shelf, too, and makes a cheerful housewarming or new-home gift. A small hanger on the backing board lets the spiral tree panel hang like a picture; for a backsplash, fix that board to a clean, flat wall with construction adhesive, propped until cured. Behind a hob, allow its maker's clearance. Wipe with a soft, damp cloth; harsh cleaners strip the patina.
Hand-embossed brass
Each spiral is raised by hand from flat solid brass over a hand-punched ground, then the panel is finished in an aged bronze patina sealed with wax.
Browse more: Brass wall tiles · Celtic tree of life with swirl branches · Swirling tree in a circle