This boho brass wall decor piece is a tree of curling spirals within a raised ring: each branch finishes in a scroll, the crown is a mass of swirls and small leaves, and the trunk twists down into flowing roots.
Details
- Size: the swirling tree panel runs 19.7 x 19.7 in to 39.4 x 39.4 in (50 x 50 cm to 100 x 100 cm)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 10 mm with a raised rim; wooden backing board with a small hanger
- Handmade: each piece is embossed to order, so relief and patina vary slightly from the photos.
Options
Each Size is one single swirling tree panel:
- 50 x 50 cm: 19.7 in square, 2.7 sq ft (0.25 m²)
- 60 x 60 cm: 23.6 in square, 3.9 sq ft (0.36 m²)
- 70 x 70 cm: 27.6 in square, 5.3 sq ft (0.49 m²)
- 80 x 80 cm: 31.5 in square, 6.9 sq ft (0.64 m²)
- 90 x 90 cm: 35.4 in square, 8.7 sq ft (0.81 m²)
- 100 x 100 cm: 39.4 in square, 10.8 sq ft (1.00 m²)
Panels cannot be cut, so measure for the whole piece.
Where to hang it, fitting and care
Hang it over a sofa or console, in an entry or stairwell, or over a bed in place of a headboard. The swirling tree panel hangs from the small hanger on its wooden board; as a backsplash, glue the board to a clean, flat wall with construction adhesive and prop it until cured. Behind a cooktop, keep its maker's clearance. Clean with a soft, damp cloth; abrasives strip the patina.
Hand-embossed brass
Each swirl is raised by hand from flat solid brass over a hand-punched ground, then the panel takes an aged bronze patina sealed with wax.
Browse more: Brass wall tiles · Curling branch tree of life in a circle · Spiral tree of life panel