These Irish wall decor tiles carry the Loop Cross Knot: four rounded loops interlocked around a tiny centre square to form a looped cross. It is a compact, open design that looks as good as a single tile on a hook as it does in a long row.
Details
- Size: each tile 3.9 x 3.9 in (10 x 10 cm), covering 0.11 sq ft (0.01 m²)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 6 mm, with a raised rim; the hollow back has a small hanger
- Handmade: embossed to order, so relief and patina vary slightly from the photos
Options
Choose a Set of the loop cross tiles, all in this one design; coverage assumes tiles butted together:
- 30 tiles: 3.2 sq ft (0.30 m²), 6 x 5 = 23.5 x 19.5 in (60 x 50 cm)
- 45 tiles: 4.8 sq ft (0.45 m²), 9 x 5 = 35.5 x 19.5 in (90 x 50 cm)
- 60 tiles: 6.5 sq ft (0.60 m²), 10 x 6 = 39.4 x 23.5 in (100 x 60 cm)
Tiles cannot be cut, so plan in whole tiles; ten in a row run 39.4 in (100 cm).
Placement, fitting and care
Dress an entryway wall above a console table, hang a few singly, dot accents through a plain kitchen backsplash, run a band behind a range or sink, or frame a fireplace surround or hearth. Set the loop cross tiles like wall tile: adhesive in each hollow back, pressed onto a flat, clean wall, then grout or caulk. Behind a cooktop, leave the clearance its maker asks for. Wipe the loop cross tiles with a soft, damp cloth and dry; harsh cleaners wear the patina.
Hand-embossed brass
The rounded loops are pressed up by hand over a hand-punched ground, keeping the open cross light against the textured background.
Browse more: Leaf Cross Knot tiles · Framed Cross Knot tiles · The full brass tile range