These Celtic cross brass tiles carry the Leaf Cross Knot, a cross whose four arms end in pointed, leaf-shaped loops around an open square. One tile on its own hangs as a small wall cross; a long run becomes a quiet repeat along a backsplash or fireplace.
Details
- Size: each tile 3.9 x 3.9 in (10 x 10 cm), covering 0.11 sq ft (0.01 m²)
- Material: solid brass sheet about 1 mm thick, embossed by hand over a hand-punched ground
- Finish: aged bronze patina, sealed with wax
- Depth: 6 mm, with a raised rim; the hollow back has a small hanger
- Handmade: embossed to order, so relief and patina vary slightly from the photos
Options
Choose a Set of the leaf cross tiles, all in this one design; coverage assumes tiles butted together:
- 30 tiles: 3.2 sq ft (0.30 m²), 6 x 5 = 23.5 x 19.5 in (60 x 50 cm)
- 45 tiles: 4.8 sq ft (0.45 m²), 9 x 5 = 35.5 x 19.5 in (90 x 50 cm)
- 60 tiles: 6.5 sq ft (0.60 m²), 10 x 6 = 39.4 x 23.5 in (100 x 60 cm)
Tiles cannot be cut, so plan in whole tiles; ten in a row run 39.4 in (100 cm).
Placement, fitting and care
Frame a fireplace surround or hearth, run a band behind a range or sink, dress an entryway wall above a console table, hang a few singly, or dot single crosses through a plain kitchen backsplash. For the leaf cross tiles, butter each hollow back with tile adhesive, press onto a flat, clean wall, then grout or caulk. Behind a cooktop, leave the clearance its maker asks for. Wipe the leaf cross tiles with a soft, damp cloth and dry; harsh cleaners wear the patina.
Hand-embossed brass
The leaf tips and the open centre are embossed by hand over a hand-punched ground.
Browse more: Loop Cross Knot tiles · Trinity Cross Knot tiles · The full brass tile range