A diagonal saltire cross runs corner to corner on these Scottish saltire knot tiles, with fine knotwork filling the four quarters between its arms. The bold X reads clearly from a distance, so the design holds its own on a fireplace wall or a long backsplash.
Details
- Size: each tile 3.9 x 3.9 in (10 x 10 cm), covering 0.11 sq ft (0.01 m²)
- Material: solid brass sheet about 1 mm thick, hand-embossed over a hand-punched ground
- Finish: aged bronze patina, wax-sealed
- Depth: 6 mm including a raised rim; the hollow back has a small hanger
- Set: 30, 45 or 60 tiles, all in this one design
- Handmade: embossed to order, so relief and patina differ slightly from the photos.
Options
Choose a Set; figures assume tiles butted together:
- 30 tiles: 3.2 sq ft (0.30 m²), e.g. 6 x 5 tiles, 23.5 x 19.5 in (60 x 50 cm)
- 45 tiles: 4.8 sq ft (0.45 m²), e.g. 9 x 5 tiles, 35.5 x 19.5 in (90 x 50 cm)
- 60 tiles: 6.5 sq ft (0.60 m²), e.g. 10 x 6 tiles, 39.4 x 23.5 in (100 x 60 cm)
Because the tiles cannot be cut, lay the design out in whole tiles first; ten in a row run 39.4 in (100 cm).
Placement, fitting and care
Run them around a fireplace surround or along the hearth, behind a range or sink, as a grid above a desk, sofa or console, or on an entryway wall; a few can hang singly from their hangers. Fit them like wall tile: butter the hollow back with adhesive, press onto a flat, clean wall, and grout or caulk once cured. Behind a cooktop, keep the clearance its maker asks for. Wipe with a soft, damp cloth and dry off; scouring pads and harsh cleaners wear through the patina.
Hand-embossed brass
Each saltire is raised from flat brass by hand, the knotwork worked into the quarters over a punched ground, and finished with patina and wax.
Browse more: Brass wall tiles · Scottish Thistle Tiles · Scottish Celtic Knot Tiles